You can return your KidsWifi to its out-of-the-box state:

  1. Make sure your KidsWifi is plugged into an outlet. Plugging it in upside down might make it easier to reach the reset role.
  2. Use a paperclip or pen to push into the reset hole (on the bottom, see picture below) until you feel it click in, then hold it for a full 5 seconds. 
  3. You'll see all the lights flash, then go out. If you don't see all the lights flash, you might not have held the reset in long enough.
  4. After a minute or so, you'll see the lights on the right side flashing up and down. Connect to the KidsWifi Setup network to set up your KidsWifi again. If you still see your normal KidsWifi network rather than the KidsWifi Setup network, try the steps again, making sure you hold the reset button for a full 5 seconds.

Did this answer your question?